SPINOTRON ® system     ENDR  ® system        MAGNOTRON ® system       SEEBECK ® system

SPINOTRON & ENDR detectors & localizations systems operation based on the ATTRACTION created by the particular material substance on the Magnetic Tuned Receptor of the system. Note here that Magnetic Tuned Receptor does not emit any kind of radiation, but is used as a simply iron magnetic compass part.  This  phenomenon is based on the magnetic tune phenomenon between the material and the SPINOTRON sensor’s Magnetic Tuned Receptor (MTR). When trying to take out the Magnetic Tuned Receptor from the magnetic field, the user experiences difficulty. Magnetic Tune is  experienced on the MTR.  Magnetic field produced from the system engine  and after modulated by a sensor existing inside the MTR, explode to the environment creating a Field between the material we are looking for and the system (device). We slightly rotate the MTR to creating angular momentum. When the MTR is entering the field, between the device and the material, resonance is happening. The detector circuitry in the device detects the resonance. Depending on the patterns of the transmitted signals, different material types can be detected. Then when we try to take out the MTR from the field line between the device and the material, the resonance is braking.  

The magnetic tune is detected. When Magnetic Tuned Receptor stops and point to a direction then the user knows that detection is done.  Measurements with the SPINOTRON & ENDR & MAGNOTRON systems have to be taken from two points for locating the material.  From the first point, measurement gives the direction (line) where material are located.  From the second point, measurement (line) gives the location that material are locate. The location is where the second measurement line, crosses the first measurement line. From a third point, measurement (line) confirms the location of the material (IDENTIFICATION PROCESS).

We strongly believe that by using this system that any installation, camp, public station, harbor, airport etc in combination with the existing resources and staff could improve and expand the operational capabilities and respond more promptly and effectively to sensitive missions.

SEEBECK ‘1’ detector & localization system operation based on the EMF emitted from the 3 antennas devices created an ATTRACTION by the particular material substance on the Magnetic Tuned Receptor of the system. Electrical Signal Patterns are transmitted on the antennas creating a Field between the material we are looking for and the device. We rotate antennas to creating angular momentum. When the antennas are entering the field, between the device and the material, resonance is happening. The detector circuitry in the device detects the resonance and beeps. Depending on the patterns of the transmitted electrical signals, different material types can be detected. When the antennas are in the field we see the resonance on the picture. Then when we try to take out the antennas from the field line between the device and the material, the resonance is braking.

                                Email: info@3levelsecurity.com            WEB:  www.3levelsecurity.com